SL Mic Hub 1
SL Mic Hub 1 forenkler kablingen av integrerte lydkonferansesystemer. Den reduserer betydelig antall kabler som må integreres, ved å bundle lydsignalene inn i en enkel Cat 5-kabel.
Article No. 506606
Finne en forhandler

A microphone hub for connecting up to four Sennheiser SpeechLine microphones and bundling the microphone cables into one, thus significantly reducing the amount of cables required in a TeamConnect conferencing system.
Audio signals from the SpeechLine microphones shall be distributed from the hub to the TeamConnect central unit via a single Cat5 cable while logic signals shall be sent directly from the hub to the TeamConnect combox using a 6-wire cable with a 6-pin terminal connector on each end.
The hub shall be “plug and play” without the need for an external power supply. The hub shall feature four microphone inputs (5-pin terminal) and an audio output (RJ-45) for connecting to the TeamConnect central unit. The pin allocation of the microphone inputs shall be as follows: pin 1: microphone mute control, pin 2: microphone mute status, pin 3: ground, pin 4: audio +, pin 5: audio –.
The hub shall be equipped with two GPIO ports (6-pin terminal): one for connecting to the TeamConnect combox and one for either daisy-chaining a second hub or for connecting an external hook button.
The pin allocation of the GPIO ports shall be as follows: pin 1: microphone mute control, pin 2: microphone mute status, pin 3: on/off hook control, pin 4: on/off hook status, pin 5: 5 V DC power supply, pin 6: ground. The hub shall also have one 7-pin terminal for connecting a global mute button, which shall add a mute capability to Sennheiser in-table mics without mute button. If more than one global mute button is used, they shall be connected in parallel to the same 7-pin terminal and an external 5 V DC power supply must be connected to pin 6 and 7. The pin allocation of the 7-pin terminal shall be as follows: pin 1: 5 V DC power supply (DC OUT), pin 2: microphone mute control, pin 3: red LED, pin 4: green LED, pin 5: ground, pin 6: 5 V DC power supply (DC IN, not used), pin 7: ground (not used).
The microphone hub shall be the Sennheiser SL MIC HUB 1.

  • Kan sammenkople opptil 4 mikrofoner

  • Kan koples til mute- og gaffelbryter

  • Plug & play-tilkopling

  • Pakker 4 lydsignaler til en standard Cat 5-kabel

  • Distribuerer logikksignaler til TeamConnect Combox

  • Kan kaskadekoples

Reviews
Be the first to write a review.

Specifications
Hva er med i esken
  • SL Mic Hub 1
  • Styringskabel 3 m, 6-pinners / 6-pinners terminalkontakt
  • 1 adapterkabel 30 cm, RJ 45 /12-pinners terminalkontakt
  • Hefte
Support
Kontakt oss
Product Support Phone

+47 24 09 11 00


Nedlastinger

  • Bruksanvisning
    • System instruction manual TeamConnect (6.6 MB) Download

  • Datablader
    • System specification TeamConnect (760 KB) Download

    • Product specification SL Mic Hub 1 (360 KB) Download

  • Hurtigguider
    • Quick Guide TeamConnect Accessories (6.4 MB) Download

  • EU samsvarserklæring
    • EU Declaration of Conformity - MEB | MAS | MAT series (450 KB) Download